• 24 Hour Analogue Timer.  Plug the Analogue Timer into the wall socket and then plug your pump or lights into the timer.
• Programming timer is a simple and quick procedure
• Switches loads of up to 3500 Watts
• Time duration of the required working time can be set by pushing in the joint slices
• Real time can be set by turning the disc in the direction of the arrow until the marked point indicates the current time
• IEC60730 Safety Standard

Convenience – automatic on and off, no hassle of plugging in & unplugging or switching on and off at the wall socket.

Energy saving – reduce electricity consumption by ensuring  your pump or lights automatically switches on and off as needed.

INSTRUCTIONS FOR USE

To Set the Time Rotate the dial clockwise until the current time is lined-up with the arrow on the dial face. The hours are marked around the edge of the dial in 24 hour format.

Each marker between the hour numbers represents 15 minutes.

To Set the Timer

The timer is triggered by the black push down / pull out segments located around the dial. Each segment represents 15 minutes.